|
|
|||||||||
|
SKATESTOPPERS® FA-FR-HR Series Skate Deterrent |
|||||||||
|
|
|||||||||
| The patented FA (Fixed Angle), FR (Fixed Radius), HR (Hand Rail) and Flat Cap Series skate deterrents are the workhorse line. These quality machined brackets are primarily extruded from 6061-T6 aluminum alloy (except as noted) to afford many years of service under the most demanding circumstances. Click here for a 10 pg catalog description of the products in this line (excludes architectural and custom products). Please call us at 619-447-6374 if you have any questions or need assistance. | |||||||||
 |
Click on the buttons to the left to see a specific part. FA and FR Series The basic distinction between the FA and the FR Series is the relative positioning of the anchor pins on the skate deterrent. In the patented FA Series skate deterrent (with the exception of FA90CC), the bracket is elongated on both ends from the corner such that pins can be inserted into the substrate at mutually exclusive planes (ie/ one pin in the face of the wall and one pin in the top of the wall). In the FR Series skate deterrent, the bracket is shortened on one end such that both pins are inserted into the same plane (ie/ both pins in the top of the wall). Although the FA Series parts provide an optimal pinning solution, the FR Series is preferred in cases where the angle created by the top of the wall and the face of the wall is other than 90 degrees (except for chamfer applications which use the FA135). See drawings at right for examples (NOTE: You need Adobe Acrobat to view these files). Choosing a FA or FR Series part: Click the "Template" thumbnail on the right to view the profiles of the FA and FR Series parts. You can print and cut out these full scale parts and check them for the best fitting bracket to your particular application. For photos of the parts, mounting hardware options, and colors, click on the specific part number to the left. HR Series The HR Series products are designed for round, tubular handrails with the following outside diameters: 1.50", 1.60", and 1.90". Parts are cast from #319 aluminum and are clear anodized (they will accept paint). If your handrail diameter is such that one of these three parts does not fit your application, you may elect the Nylon Series Rail Wrap or have a custom piece developed (see custom services). Choosing a HR Series Part: Click the HR Series thumbnail at the right. Print out the templates and check the scaled cutouts for the best fitting part to your handrail. |
 |
|||||||
 |
|||||||||
 |
|||||||||
 |
|||||||||
 |
click to see FA Series example |
||||||||
 |
 |
||||||||
 |
|||||||||
 |
|||||||||
  |
|||||||||
 |
|||||||||
|
click to see FR Series example |
|||||||||
|
|
|||||||||
 |
|||||||||
 |
|||||||||
|
|
|||||||||
|
click for FA/FR TEMPLATE |
|||||||||
|
|
|||||||||
|
|
|||||||||
 |
|||||||||
|
click for HR TEMPLATE |
|||||||||
| Flat Cap The Flat Cap products are designed for use on tops of ledges and walls or sidewalk approaches to stairs. These products are strategically installed in the path of skate traffic and effectively act as speed bumps. | |||||||||
| Copyright 2007 Intellicept | Instructions/Cut Sheets | ||||||||
| Stop Skateboard Damage with SKATESTOPPERS® Skate Deterrents. | |||||||||
