 |
|||||||||
|
SKATESTOPPERS® Flat Cap Skate Deterrent |
|||||||||
|
These cast aluminum parts are designed to be applied to flat surfaces.
Attach them to the tops of walls and ledges or place them in the approach
path to stairs or ledges from which skaters are leaping. Parts are
available in Oval, Disc and Strip designs. Ovals
and Discs provide great
flexibility in the layout of pattern. Strips offer convenience of
greater coverage with less installation labor. Parts are designed to exceed
trip hazard requirements as set forth in ADA Chapter 3. If you require a decorative looking skate deterrent for the top of a wall, the Maple Leaf, White Oak, SeaStar and Sealife Family parts are produced in a flat part (see AS Series) |
|||||||||
| Material: | Cast aluminum | ||||||||
| Outside Dimensions: | Oval 2.0" x 3.0" x 0.25" | ||||||||
| Disc 6" Diameter x 0.25" | |||||||||
| Strip 4.0" x 18.0" x .025" | |||||||||
| Colors: | Clear Anodize | ||||||||
| Mounting Hardware: | Adhesive and Drive Pin | ||||||||
| Spacing: | Oval - 4 pcs/linear foot | ||||||||
| Disc - 2 pcs/1.25 linear foot | |||||||||
| Strip -1 pc/1.5 linear foot | |||||||||
|
Oval |
6" Disc |
||||||||
 |
 |
||||||||
|
17"Strip |
|||||||||
|
|
|||||||||
 |
 |
||||||||
|
Copyright 2007 Intellicept |
|||||||||
