 |
|||||||||
|
SKATESTOPPERS® HR Series Skate Deterrent |
|||||||||
|
The HR Series products are made for standard round tube hand rails.
Parts are available in 1.5", 1.6" and 1.9" standard outside diameters
(special diameters of 2.5", 3.5" and 4.5" available).
These patented parts incorporate Intellicept's SMART PIN™ design,
eliminating the need to tap the rail. If your rail is not a standard size, see our
Nylon Rail Wrap or
Custom Services. Note: The ADA (American with Disabilities Act) forbids the application of any obstruction on an "accessible" handrail. |
|||||||||
| Material: | Cast Aluminum (Bronze and Brass available on qualifying orders) | ||||||||
| Finish: | Clear Anodize (aluminum only) | ||||||||
| Mounting and Hardware "HR"or "HRAS" style: | Smart Pins™ and adhesive | ||||||||
| Mounting and Hardware "HAND" style: | Barrel Nut and threadlocker | ||||||||
|
HR1.6 (1.6" O.D.) or HR1.9 (1.9" O.D.) |
HRAS1.5 (1.5" O.D.) |
||||||||
|
|
 |
||||||||
|
Hand1.6 (1.6"O.D.) or HAND1.9 (1.9" O.D.) |
OakHand1.6 (1.6" OD) OakHand1.9 (1.9" OD) |
||||||||
 |
 |
||||||||
|
1" x 3" HRFlat |
2.5" Diameter OakDisc (custom) |
||||||||
|
|
|
||||||||
|
Copyright 2007 Intellicept |
|||||||||
